Skip to content

Spyder Robotics

Herpstat 4 V2 & SpyderWeb Replacement Fuses – 3-pack

From $8.95

8 in stock, ready to ship

Buy more, pay less

Each, for the whole order. Change the quantity below and the total follows.

Spare output fuses for the Herpstat 4, so one dead outlet does not mean a cold cage for long. Three 3.5 amp, fast-acting, 5 x 20 mm fuses for the outputs of the Herpstat 4 Version 2 and Herpstat 4 SpyderWeb. They are not for the Herpstat 6, which takes 3.15 amp.

Tell me when it is back

One email when it is back in stock. No list, no newsletter.

Goes in your cart as the best price:

  • Items in all

Subtotal with your choices

Your cart already has all we have.

in stock now. The other are on backorder and ship as soon as they are in.

  • Ships across Canada and the USA. Shipping is priced before you pay anything.
  • Free pickup in Calgary, or at any Alberta show.
  • 14 day returns on stock items, one year warranty on our builds.

Part number Fuses4

Description

On this page
  1. Which fuse it replaces
  2. Replacing a fuse
  3. Questions
  • 3.5 A
  • Fast-acting
  • 5 x 20 mm
  • 3-pack
  • Herpstat 4

The Herpstat 4 has a separate fuse for each of its four outputs. If one blows, only that outlet loses power and the other three keep running, so a spare in the drawer gets the cage back on quickly once you have found the fault.

At a glance

Rating
3.5 A
Type
Fast-acting
Size
5 x 20 mm
Quantity
3
Fits
Herpstat 4 Version 2 and Herpstat 4 SpyderWeb, output fuses
Not for
Herpstat 6 outputs (3.15 A)

Which fuse it replaces

These replace the output fuses on the Herpstat 4 Version 2 and Herpstat 4 SpyderWeb. The Herpstat 6 uses the same size of fuse at a lower rating, so the two are not interchangeable. Other Herpstats differ again: the Herpstat 1 takes 6.3 A and the Herpstat 2 takes 8.0 A.

Thermostat

Fuse

Spares

Herpstat Intro V2 and Intro+ V2

3.15 A, 5 x 20 mm

Intro V2 fuses

Herpstat 1 Basic, 1, 1 Redline, and 1 SpyderWeb

6.3 A, 5 x 20 mm

Herpstat 1 fuses

Herpstat 2, 2 Redline, and 2 SpyderWeb

8.0 A, 5 x 20 mm

Herpstat 2 fuses

Herpstat 4 V2 and 4 SpyderWeb, each output

3.5 A, 5 x 20 mm

This pack

Herpstat 6, each output

3.15 A, 5 x 20 mm

Herpstat 6 output fuses

Herpstat 6, main fuse

15 A, 6.3 x 32 mm

Herpstat 6 main fuses

Herpstat EZ1

4.0 A, 5 x 20 mm

EZ1 fuses

Herpstat EZ2

6.3 A, 5 x 20 mm

EZ2 fuses

Replacing a fuse

  1. Unplug the Herpstat 4 and disconnect every heater, probe, and cable.

  2. Open the case as the Spyder Robotics manual describes. On the SpyderWeb model that means removing the four screws on the bottom and lifting off the top half.

  3. Find the fuse in front of the outlet that stopped working. Each of the 4 outputs has its own.

  4. Check the new fuse matches the rating above, then swap it into the fuse clips.

  5. Check the heater on that output for a damaged cord or a load over the output limit.

  6. Reassemble the unit, plug it back in, and confirm the output works before you rely on it.

Find the cause first
A blown fuse usually means an overload, a short, or a power surge. Unplug everything before you replace it, never fit a higher-rated or slow-blow fuse or bypass the holder, and if the new fuse blows too, stop using the unit until the fault is found.

Useful with it

Questions

How do I know an output fuse has blown?

The display works and shows that output sending power, but the outlet gives none. Wrong settings or a loose plug can look the same, so check those first.

Can I use a slow-blow or higher-rated fuse?

No. Use a 3.5 A fast-acting 5 x 20 mm fuse. Anything else weakens the protection.

Can I replace it myself?

Spyder Robotics makes the fuses user replaceable, but you have to open the case. Follow the Herpstat 4 and 6 SpyderWeb manual, and get help from someone qualified if you are not comfortable with electrical equipment.

Part numberFuses4
BrandSpyder Robotics
Shipping weight0.2 lb
Shipping box1 x 1 x 1 in

Box size and weight are the packed carton, for shipping only, not the size of the item itself.

Shipping

Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.

Returns

14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns

Warranty

One year warranty on the construction of anything we build.

Questions

Ask about it

Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.

More in Thermostats and monitoring