Spyder Robotics
Herpstat EZ1 Replacement Fuse – 4.0 Amp (3-pack)
From $5.00 was
7 in stock, ready to ship
Buy more, pay less
Each, for the whole order. Change the quantity below and the total follows.
Spare fuses for the Herpstat EZ1, so a blown fuse does not leave a cage without heat for long. Three 4.0 amp, fast-acting, 5 x 20 mm fuses, the rating Spyder Robotics specifies for the EZ1. They are not for the EZ2, which takes 6.3 amp.
Part number FuseEZ-1
Description
On this page
- 4.0 A
- Fast-acting
- 5 x 20 mm
- 3-pack
- Herpstat EZ1
The EZ1 has one user replaceable fuse. Spyder Robotics recommends keeping spares on hand to avoid downtime, and this pack gives you three.
At a glance
- Rating
- 4.0 A
- Type
- Fast-acting
- Size
- 5 x 20 mm
- Quantity
- 3
- Fits
- Herpstat EZ1
- Not for
- Herpstat EZ2 (6.3 A), Herpstat 1 (6.3 A), Herpstat 2 (8.0 A)
Which fuse it replaces
The EZ1 and EZ2 use the same size of fuse at different ratings, so they are not interchangeable. Never fit a 6.3 A EZ2 fuse in an EZ1.
Thermostat | Fuse | Spares |
|---|---|---|
Herpstat Intro V2 and Intro+ V2 | 3.15 A, 5 x 20 mm | |
Herpstat 1 Basic, 1, 1 Redline, and 1 SpyderWeb | 6.3 A, 5 x 20 mm | |
Herpstat 2, 2 Redline, and 2 SpyderWeb | 8.0 A, 5 x 20 mm | |
Herpstat 4 V2 and 4 SpyderWeb, each output | 3.5 A, 5 x 20 mm | |
Herpstat 6, each output | 3.15 A, 5 x 20 mm | |
Herpstat 6, main fuse | 15 A, 6.3 x 32 mm | |
Herpstat EZ1 | 4.0 A, 5 x 20 mm | This pack |
Herpstat EZ2 | 6.3 A, 5 x 20 mm |
Replacing a fuse
Unplug the Herpstat EZ1 and disconnect every cable.
Find the fuse drawer built into the power input connector on the bottom of the unit.
Gently insert a flathead screwdriver into the recess and twist lightly to pop the drawer open.
Replace the blown fuse with a 4.0 A fast-acting 5 x 20 mm fuse. The drawer holds a spare in its second spot.
Close the drawer fully, plug it back in, and check it works.
Find the cause first
A blown fuse usually means an overload, a short, or a power surge. Unplug everything before you replace it, never fit a higher-rated or slow-blow fuse or bypass the holder, and if the new fuse blows too, stop using the unit until the fault is found.
Useful with it
-
-
Sale
Spyder Robotics
Replacement Fuse 3-pack (Herpstat 1 Basic, Herpstat 1, Herpstat 1 Spyderweb)
$8.95 was $9.99
In stock
Questions
Where is the fuse?
In a drawer built into the power input connector on the bottom of the thermostat.
Will these fit the Herpstat 1 or 2?
No. The Herpstat 1 takes a 6.3 A fuse and the Herpstat 2 an 8.0 A fuse.
Is there a manual?
Yes, the Herpstat EZ manual from Spyder Robotics covers the fuse drawer.
| Part number | FuseEZ-1 |
|---|---|
| Brand | Spyder Robotics |
| Shipping weight | 0.2 lb |
| Shipping box | 1 x 1 x 1 in |
Box size and weight are the packed carton, for shipping only, not the size of the item itself.
Shipping
Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.
Returns
14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns
Warranty
One year warranty on the construction of anything we build.
Questions
Ask about it
Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.
More in Thermostats and monitoring
-
Sale
Sale
Sale
-
-