Spyder Robotics
Herpstat 6 Replacement Main Fuse – 15 Amp (3-pack)
From $10.00 was
18 in stock, ready to ship
Buy more, pay less
Each, for the whole order. Change the quantity below and the total follows.
Spare main fuses for the Herpstat 6. The main fuse protects the whole unit's power circuit, and if it blows the thermostat goes dark, so a correct spare on the shelf saves a long wait. Three 15 amp, fast-acting, 6.3 x 32 mm fuses, not for the 3.15 amp output holders.
Part number Fuses6-Ceramic
Description
On this page
- 15 A
- Fast-acting
- 6.3 x 32 mm
- 3-pack
- Herpstat 6 main
The main fuse sits on the Herpstat 6's main power circuit. If too much current flows, it breaks the circuit and the thermostat stops getting power until the problem is fixed and the fuse replaced. Running six outputs from one unit makes it worth keeping spares.
At a glance
- Rating
- 15 A
- Type
- Fast-acting
- Size
- 6.3 x 32 mm
- Quantity
- 3
- Fits
- Herpstat 6, main fuse
- Not for
- Herpstat 6 output fuses (3.15 A)
Which fuse it replaces
The Herpstat 6 has a main fuse for the whole unit and a smaller fuse for each output. These are the main fuses: larger, and rated far higher. Never put one in an output holder.
Thermostat | Fuse | Spares |
|---|---|---|
Herpstat Intro V2 and Intro+ V2 | 3.15 A, 5 x 20 mm | |
Herpstat 1 Basic, 1, 1 Redline, and 1 SpyderWeb | 6.3 A, 5 x 20 mm | |
Herpstat 2, 2 Redline, and 2 SpyderWeb | 8.0 A, 5 x 20 mm | |
Herpstat 4 V2 and 4 SpyderWeb, each output | 3.5 A, 5 x 20 mm | |
Herpstat 6, each output | 3.15 A, 5 x 20 mm | |
Herpstat 6, main fuse | 15 A, 6.3 x 32 mm | This pack |
Herpstat EZ1 | 4.0 A, 5 x 20 mm | |
Herpstat EZ2 | 6.3 A, 5 x 20 mm |
Replacing a fuse
Unplug the Herpstat 6 and disconnect every heater, probe, and cable.
Open the housing following the Spyder Robotics manual for your model; the main fuse is inside.
Check the new fuse is 15 A, fast-acting, 6.3 x 32 mm, then fit it in the main fuse holder.
Check the connected heaters for damaged cords, shorts, or a total load over the unit's limit.
Reassemble, plug it back in, and confirm the thermostat and its outputs work before you rely on it.
Find the cause first
A blown fuse usually means an overload, a short, or a power surge. Unplug everything before you replace it, never fit a higher-rated or slow-blow fuse or bypass the holder, and if the new fuse blows too, stop using the unit until the fault is found.
Useful with it
-
Sale
Questions
Main fuse or output fuse: which has blown?
If the whole unit is dead, suspect the main fuse. If the unit works but one outlet gives no power, it is more likely that output's 3.15 A fuse.
Why would the main fuse blow?
An overload, a short circuit, or a power surge. Find and fix the cause before fitting a new one.
Can I use a slow-blow fuse?
No. Use a 15 A fast-acting 6.3 x 32 mm fuse.
| Part number | Fuses6-Ceramic |
|---|---|
| Brand | Spyder Robotics |
| Shipping weight | 0.2 lb |
| Shipping box | 1 x 1 x 1 in |
Box size and weight are the packed carton, for shipping only, not the size of the item itself.
Shipping
Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.
Returns
14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns
Warranty
One year warranty on the construction of anything we build.
Questions
Ask about it
Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.
More in Thermostats and monitoring
Sale
Sale
Sale-
-
-