Skip to content

Redline Science

Redline Science 4" Heat Tape - 6 W/ft (Sold by the Foot)

From $4.00 per foot

1033 in stock, ready to ship

Buy more, pay less

Each, for the whole order. Change the quantity below and the total follows.

Belly heat for racks and PVC enclosures, at 6 W per foot. The 4 in tape is sold by the foot and cut to the length your build needs.

  • 4 in wide, 6 W per foot

  • Up to 40 ft in one run

  • Cut as one piece or several

  • Needs a proportional thermostat and connections, sold separately

Tell me when it is back

One email when it is back in stock. No list, no newsletter.

Goes in your cart as the best price:

  • Items in all

Subtotal with your choices

Sold by the foot: the quantity is the length in feet, cut as one piece.

Your cart already has all we have.

in stock now. The other are on backorder and ship as soon as they are in.

  • Ships across Canada and the USA. Shipping is priced before you pay anything.
  • Free pickup in Calgary, or at any Alberta show.
  • 14 day returns on stock items, one year warranty on our builds.

Part number RL4in

Description

On this page
  1. How it heats
  2. Ordering by the foot
  3. Setting it up
  4. Safety
  5. Questions
  • 4 in wide
  • 6 W per ft
  • Sold by the foot
  • 40 ft max run
  • Redline Science THG

The 4 in gives more coverage than the 3 in while drawing less per foot than the 6 in, a useful width for moderate warm zones such as belly heat under rack tubs.

At a glance

Tape
Redline Science THG heat tape
Width
4 in
Output
6 W per linear foot
Sold
By the foot, quantity 1 is 1 ft
Maximum run
40 ft (240 W)
Tolerance
Width ± ⅛ in, length up to ± ¼ in per foot
Connections
Not included
Control
Proportional thermostat required

How it heats

THG tape warms the surface above it, giving supplemental belly heat under tubs or in compatible PVC enclosures. Some racks use one strip across several shelves, others a separate piece for each level; either way the total load must stay within your equipment's ratings.

Heat only part of each tub or cage floor, so your animal can move between warm and cool. One run can warm several tubs in a rack, but check each tub.

Ordering by the foot

Your quantity is the number of feet. We send it as one continuous piece unless you add cutting instructions to your order notes, for example two 10 ft pieces from 20 ft. Finished lengths can vary a little, so order a bit extra if you need an exact minimum.

Work out the load before you choose a thermostat: multiply the feet by 6 W.

Length

Load

1 ft

6 W

5 ft

30 W

10 ft

60 W

20 ft

120 W

30 ft

180 W

40 ft

240 W

Runs longer than 40 ft are not recommended. For bigger projects, split the tape into more than one controlled circuit.

Setting it up

  1. Measure the area to heat and decide how many separately powered pieces you need.

  2. Add a connection for each powered piece: our connectors and covers if you wire it yourself, or our supply and install service and we fit the cord before it ships. For a multi-level rack on one cord, see parallel wiring.

  3. Lay the tape flat with room for air to move. In a rack, recessing the tape cuts wear from sliding tubs.

  4. Connect it to a proportional thermostat rated for the full load, and secure the probe on the heated area where cleaning and tubs cannot move it.

  5. Let it settle, then check the surface in several places and the cool side with a separate thermometer before animals go in.

Safety

Never run it uncontrolled
Never plug heat tape straight into an outlet. Never overlap, fold, or power it while rolled up, and do not sandwich it tightly between insulating layers. Trapped heat makes dangerous hot spots.
  • Protect the connections from moisture and animals. If you have not wired heat tape before, use our install service or a qualified person.

  • Inspect it regularly for discolouration, rippling, scratches, or damaged insulation. Disconnect damaged tape and replace it.

  • Replacing old tape? Check the thermostat, probe, and connections at the same time, and do not reuse damaged connectors.

Our guide to heat tape failures covers the warning signs in detail.

Other widths and connections

Questions

Does it come with a power cord?

No, the listing is tape only. Add our connection kit or our install service for each powered piece.

Which thermostat should I use?

A proportional thermostat, such as a Herpstat, with enough capacity for the total wattage of your run.

Can heat tape cover the whole tub floor?

Generally no. Heat part of the floor and leave a cooler area so your animal can regulate its temperature.

Part numberRL4in
BrandRedline Science
Shipping weight0.1 lb
Shipping box12 x 4 x 0.125 in

Box size and weight are the packed carton, for shipping only, not the size of the item itself.

Shipping

Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.

Returns

14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns

Warranty

One year warranty on the construction of anything we build.

Questions

Ask about it

Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.

More in Heating