Arcadia ThermalZoo Pro (Dual Pro T5 6%)

Reptiles take heat, UV, and visible light from one source, the sun. ThermalZooPro builds that into one hand-made hanging fitting: Arcadia angles its ProT5 and Jungle Dawn fixings so their light crosses the two heat lamps below, giving a wide, measurable basking zone with the whole spectrum from UV to infrared, rather than separate spots of heat and UV.

It is built to change with your animals. Swap heat lamp types and wattages, change the UVB strength in each ProT5 fitting, or unclip a ProT5 fitting and fit a Jungle Dawn LED bar in its place. Arcadia designed it so future fittings can swap in too.

Who it suits

• Larger terrestrial vivariums

• Larger screen-top arboreal enclosures

• Rooms and zoo enclosures where the fitting hangs inside

Lamps it takes

• Heat: any lamp from Arcadia's heating range, such as Solar Basking Floods and Spots, Halogen Flood Lamps, Deep Heat Projectors, the 80 W D3 Basking Lamp, and Ceramic Heaters, up to 250 W across the two fittings.

• UVB: 24 W HO T5 lamps in D3 6%, D3+ 12%, or DragonLamp 14%, to suit your species.

Use Arcadia's projection charts (on the box, in the owner's booklet, and on its website) and its lighting guide to match the lamps to your species.

Setting it up

1. Choose your heat lamps and UVB strength from the projection and UV index charts.

2. Hang the fitting over the basking area with the included four-point hanging system.

3. Plug each heat lamp into its own dimming thermostat; each heat fitting is switched and plugged separately for this.

4. Link the lighting of a second or third ThermalZooPro to the same power source with a link cable, if you have them. The heat lamps do not link.

5. Check the temperature and UV index at the basking spot before your animal goes in.

Do not look directly into the light.

What's included

• ThermalZooPro fitting with two ProT5 fittings

• Two 24 W ProT5 Forest 6% UVB lamps

• 100 W Solar Basking Floodlight

• 50 W Deep Heat Projector

• Four-point hanging system

Questions