Skip to content

Arcadia

Arcadia Reptile Deep Heat Projector 80 W - 110-120 V

From $49.95

Only 2 left in stock

Buy more, pay less

Each, for the whole order. Change the quantity below and the total follows.

Deep overhead warmth with almost no light, for bigger enclosures and cooler rooms. This is the stronger of Arcadia's Deep Heat Projectors, and its infrared heat works for daytime basking or for night heat.

  • 80 W, the 110 to 120 V version with an E26 base

  • Infrared-A and Infrared-B, virtually no visible light

  • Wide beam with an internal reflector

  • Made for a dimming thermostat

Tell me when it is back

One email when it is back in stock. No list, no newsletter.

Goes in your cart as the best price:

  • Items in all

Subtotal with your choices

Your cart already has all we have.

in stock now. The other are on backorder and ship as soon as they are in.

  • Ships across Canada and the USA. Shipping is priced before you pay anything.
  • Free pickup in Calgary, or at any Alberta show.
  • 14 day returns on stock items, one year warranty on our builds.

Part number RARHP80Z

Description

On this page
  1. How it heats
  2. Setting it up
  3. Safety
  4. Questions
  • 80 W
  • IR-A and IR-B
  • No visible light
  • E26
  • Dimmable

Where a ceramic emitter gives off mostly long-wave infrared, the Deep Heat Projector produces a large share of Infrared-A and Infrared-B, the wavelengths behind much of the sun's warmth. An internal reflector sends that heat down to the basking area instead of out the sides.

At a glance

Wattage
80 W
Voltage
110 to 120 V, 60 Hz
Base
E26
Heat
Infrared-A and Infrared-B
Light
Virtually none
UVB
None
Control
Dimming thermostat
Fixture
Heat-rated ceramic E26 holder, rated 80 W or more, not included

How it heats

  • Infrared-A and B warm the animal and the basking surface under the beam.

  • Virtually no light, so the cage stays dark at night when your species needs night heat.

  • A wide beam and reflector make a usable warm zone rather than a pinpoint.

  • Quick to warm up, and it dims smoothly on the right thermostat.

The extra power suits larger enclosures, cooler rooms, and setups that need more heat. In a small or well-insulated PVC cage, 80 W can be too much, so the 50 W may be the better fit there.

Arcadia's temperature guide

Arcadia's reference readings at the basking surface, with the 50 W beside it for comparison:

Distance

80 W

50 W

6 in (15 cm)

62 °C (144 °F)

55 °C (131 °F)

8 in (20 cm)

51 °C (124 °F)

45 °C (113 °F)

12 in (30 cm)

44 °C (111 °F)

36 °C (97 °F)

16 in (40 cm)

36 °C (97 °F)

29 °C (84 °F)

Your cage will differ with the room, airflow, the basking surface, and the thermostat setting. Measure your own.

Setting it up

  1. Fit it in a heat-rated ceramic E26 holder rated for at least 80 W.

  2. Hang it above the warm end at a distance that keeps the basking surface in range. Inside the cage, put it behind a lamp guard so it cannot be touched.

  3. Connect it to a dimming thermostat and place the probe as the thermostat's maker advises.

  4. Once the cage has settled, check the basking surface with an infrared thermometer and the air with a digital thermometer.

  5. Leave a cooler side with hides so your animal can move off the heat.

It gives no UVB and no daytime light. Add a day light, and UVB where your species needs it. Only heat through the night when your animal and room need it, since many reptiles benefit from a night drop.

Safety

Closer means much hotter
At 6 in the 80 W reads around 62 °C (144 °F) at the surface. Keep it well clear of your animal and anything flammable, let it cool before handling, and replace a damaged projector or holder straight away.
Our advice
In a PVC cage the heat stays in well, so start with the thermostat set low and work up while you watch the readings. A Herpstat or another dimming thermostat with enough headroom does the job.

Useful with it

Questions

Will a Herpstat run it?

Yes, a Herpstat with a dimming output can control it. Check the output's wattage rating and follow the setup guide.

Is a lamp holder included?

No. You get one 80 W projector. The holder and thermostat are sold separately.

Part numberRARHP80Z
BrandArcadia
Shipping weight1 lb
Shipping box5 x 5 x 5 in

Box size and weight are the packed carton, for shipping only, not the size of the item itself.

Shipping

Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.

Returns

14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns

Warranty

One year warranty on the construction of anything we build.

Questions

Ask about it

Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.

Goes with it

Complete the setup

The rest of a arboreal snake kit. Or answer four questions and get the whole thing explained.

More in Heating