1 of 3
MistKing
MistKing Tubing Cutter with Collet Tool
From $8.95 was
In stock
Buy more, pay less
Each, for the whole order. Change the quantity below and the total follows.
Cuts MistKing tubing clean and square, so each end seats properly in a push-to-connect fitting. The collet tool on it releases tubing from those fittings when you service or rearrange a system.
Part number MKTC1
Description
- Square cuts
- Collet tool built in
- For MistKing tubing
- Part MKTC1
Push-to-connect fittings only seal when the tubing goes in straight. Scissors and utility knives tend to crush the tube or leave an angled end that will not sit right. This cutter makes a straight cut across the tube without deforming it.
At a glance
- Use
- Cutting MistKing misting tubing
- Extra function
- Collet tool for push-to-connect fittings
- MistKing part
- MKTC1
- In the box
- 1 tubing cutter
Using it
Measure the run between the pump, fittings, and nozzles before you cut.
Set the tubing in the cutter and cut straight across.
Push the fresh end all the way into the fitting.
To take tubing out, press the fitting's collet in with the tool first, then pull the tubing. Pulling against a locked collet strains the fitting. The tool helps most in tight spots or on a collet that is hard to press by hand.
Keep it handy after the first install too: you need a clean new cut whenever you add a tee, elbow, or ball valve, or reroute a line.
Useful with it
Questions
Can I just use scissors?
They tend to crush the tubing or cut it at an angle, and either can stop it seating in a push-to-connect fitting.
Does a MistKing system come with one?
It depends on the system. The Ultimate system includes this cutter with its collet tool.
| Part number | MKTC1 |
|---|---|
| Brand | MistKing |
| Shipping weight | 0.25 lb |
| Shipping box | 4 x 1 x 1 in |
Box size and weight are the packed carton, for shipping only, not the size of the item itself.
Shipping
Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.
Returns
14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns
Warranty
One year warranty on the construction of anything we build.
Questions
Ask about it
Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.
More in Humidity, misting, and cooling
Sale
Sale
New