MistKing
MistKing Advanced Misting System Version 5.0
From $649.99 was
In stock
Buy more, pay less
Each, for the whole order. Change the quantity below and the total follows.
Automatic misting for a whole reptile room, rack collection, zoo exhibit, or greenhouse. MistKing's high-capacity pump feeds a ⅜ in backbone line that branches into ¼ in nozzle lines, with 15 nozzle assemblies in the box to start.
Pump up to about 125 PSI
About 10 to 70 or more misting heads, depending on layout
12 Value T and 3 Value L assemblies included
ST-24 timer, metal bulkhead, and filter included; reservoir not
Part number AdvMistv5
Description
- Version 5.0
- Up to about 125 PSI
- 10 to 70+ heads
- ⅜ in backbone
- 15 assemblies
At a glance
- Version
- 5.0
- Pump
- Large-capacity 24 V diaphragm, up to about 125 PSI
- Nozzles
- 12 Value T and 3 Value L included, about 10 to 70+ heads depending on design
- Timer
- ST-24 Digital Seconds Timer
- Tubing
- 15 ft of ⅜ in black opaque for the backbone, 35 ft of ¼ in for nozzle lines
- Reservoir
- Not included; ⅜ in metal bulkhead and filter supplied
Who it suits
Choose the Advanced when you expect more than about 15 to 20 misting heads, or need the larger backbone for long or complex runs. For fewer, the Starter or Ultimate fits better; the Ultimate handles up to about 20 heads. The 70+ figure is not a promise for every layout: long runs and lots of branching bring it down.
How it works
Instead of running everything through ¼ in tubing, the pump feeds a ⅜ in main line. Reducing tees and elbows branch ¼ in lines off it to each nozzle, or a manifold can feed several lines from one spot. The diaphragm pump is built for long run times, and running it dry will not damage it.
Upgraded timer electronics with a higher rating, to handle the larger pump's load and repeated cycles.
Heavy-duty ⅜ in metal bulkhead with a plug, for a strong reservoir connection.
White ⅜ in reservoir filter that shows debris, so you know when to clean it.
Setting it up
Choose a clean reservoir big enough for your schedule. Our 4 gallon bucket works, and we drill it for this system's ⅜ in bulkhead when you order the two together.
Fit the ⅜ in bulkhead and filter to the reservoir.
Place the pump securely outside the reservoir, where you can reach it.
Plan the ⅜ in backbone along the most efficient route through the room.
Branch ¼ in lines off it with the reducing fittings.
Mount the T and L assemblies where they cover each enclosure.
Program the ST-24.
Test every connection, spray pattern, and nozzle before regular use.
Adding nozzles
Extend the ⅜ in backbone with more tubing and reducing tees, and add single, double, or quad nozzle assemblies where you need coverage. Count every head when you plan capacity. Very large facilities may do better with separate systems or zones.
What's included
Large-capacity diaphragm pump with ⅜ in fittings
24 V power adapter, 110 V
⅜ in metal reservoir bulkhead with plug
⅜ in ball valve
35 ft of ¼ in black opaque tubing
15 ft of ⅜ in black opaque tubing
12 Value T misting assemblies
3 Value L misting assemblies
2 reducing tees, ⅜ to ¼ in
1 reducing elbow, ⅜ to ¼ in
20 x ¼ in tubing clips
10 x ⅜ in tubing clips
ST-24 Digital Seconds Timer
⅜ in reservoir filter
Installation instructions
Useful with it
Sale
4 gal Misting System Bucket
$20.00
Only 1 left
New
Questions
Should I buy it for 10 nozzles?
Usually not. The Starter or Ultimate suits a smaller system better. The Advanced makes sense past about 15 to 20 heads.
Can one system mist a whole reptile room?
Often, depending on the room and layout. It is built for large multi-enclosure systems.
| Part number | AdvMistv5 |
|---|---|
| Brand | MistKing |
| Shipping weight | 10 lb |
| Shipping box | 12 x 12 x 12 in |
Box size and weight are the packed carton, for shipping only, not the size of the item itself.
Shipping
Parcels across Canada and the US are priced at checkout from the packed boxes. Pallets and freight we price by hand, usually within one business day, and you pay nothing until you have seen the total. Pickup in Calgary is free.
Returns
14 day returns on eligible unused stock items, return shipping paid by the customer. Built-to-order goods are covered by the construction warranty rather than by returns. Restocking Fees Apply for returns
Warranty
One year warranty on the construction of anything we build.
Questions
Ask about it
Anything this page does not answer. We will get back to you as soon as we can, and good answers go up here for the next person.
More in Humidity, misting, and cooling
Sale
Sale