4 in stock (can be backordered)
Original price was: CAD289.99.CAD269.95Current price is: CAD269.95.
Herpstat 1 SpyderWeb by Spyder Robotics is a Wi-Fi reptile thermostat with one controlled output and a 700W maximum load.
Unlike basic thermostats, it uses proportional heating to help maintain steady temperatures. In addition, built-in Wi-Fi lets you monitor your enclosure through a web browser.
Ideal for: PVC reptile enclosures, ReptiRad heat panels, breeding racks and incubators.
Important: Wi-Fi is optional for normal heating. The single output controls only one function at a time.
4 in stock (can be backordered)
Precision Heating With Wi-Fi Monitoring
700W Output • Proportional Heating • Online Temperature Monitoring
Single output: Controls one heating zone or other supported function.
700W capacity: Supports compatible equipment up to 700 watts.
Proportional heating: Adjusts power to help maintain steady temperatures.
Wi-Fi monitoring: View temperatures and output status through a web browser.
Advanced schedules: Program up to four temperature periods each day.
Safety features: Temperature alarms, probe fault detection and safety shutoff.
Included: One steel-tipped temperature probe.
The Herpstat 1 SpyderWeb is a Wi-Fi reptile thermostat made by Spyder Robotics. It combines accurate heating control with online temperature monitoring.
Unlike basic thermostats, the Herpstat adjusts heating power as temperatures change. As a result, it helps maintain steady conditions inside your reptile enclosure.
In addition, built-in Wi-Fi lets you check temperatures through a web browser. Therefore, you can review your heating system without standing beside the controller.
The Herpstat 1 SpyderWeb also includes safety alarms, daily schedules and temperature history graphs. Consequently, it offers more control than a basic on/off thermostat.
The Herpstat 1 SpyderWeb has one controlled outlet. Therefore, it is ideal for one enclosure or heating zone.
For example, you can connect a compatible radiant heat panel and set your desired temperature. The thermostat then adjusts power to maintain that setting.
However, the single output cannot control two separate heating zones on its own.
A basic on/off thermostat switches a heater between full power and off. As a result, enclosure temperatures may rise and fall more noticeably.
In contrast, proportional heating adjusts the power supplied to compatible equipment. Therefore, the heater can respond more smoothly as temperatures change.
This makes the Herpstat 1 SpyderWeb a strong choice for radiant heat panels, heat tape and other suitable heating devices.
The SpyderWeb model adds network features to the standard Herpstat design.
For example, you can check current temperatures, view past readings and receive supported email alerts.
Furthermore, the thermostat can send scheduled status reports when properly configured.
However, Wi-Fi is optional. The thermostat continues to control heating without an internet connection.
Soft startup gradually increases power when heating begins. Therefore, compatible equipment does not need to receive full power immediately.
In addition, this feature can reduce sudden power changes during startup.
Every enclosure holds heat differently. For example, PVC cages often retain heat better than glass terrariums.
Auto Power Matching adjusts the heating response to suit these conditions. As a result, the thermostat can maintain temperatures more smoothly.
The Herpstat tracks temperature changes over time. Therefore, you can review how your heating system performs.
For example, a history graph may show that temperatures fall overnight. Consequently, you can check whether your heater has enough capacity.
The Herpstat 1 SpyderWeb includes built-in Wi-Fi. Therefore, you can monitor your thermostat using a compatible phone, tablet or computer.
Once connected to your local network, the thermostat provides access to supported information through a web browser.
For example, you can check the current probe temperature and heating output.
In addition, the local web interface allows supported setting changes.
The thermostat can also upload status information to the SpyderWeb online service.
As a result, you can view supported readings while away from your reptile room.
However, the manufacturer’s online service is designed for monitoring. It does not provide remote setting changes.
The SpyderWeb system supports email alerts when selected error conditions occur.
Therefore, you can receive an extra warning if the controller detects a problem.
However, alerts require a working network connection. In addition, you must set up and test the email features.
You can also configure scheduled status emails.
For example, the system can send regular updates about your heating setup.
Consequently, you can review the thermostat’s performance without checking the display each time.
The thermostat works normally without Wi-Fi. Therefore, losing your internet connection does not automatically stop temperature control.
However, online monitoring and email alerts will be unavailable until the connection returns.
SpyderWeb setup may require some knowledge of Wi-Fi networks and router settings. In addition, remote online monitoring does not allow setting changes. For normal heating control, Wi-Fi is optional.
The Herpstat 1 SpyderWeb supports several operating modes. However, its single outlet can perform only one function at a time.
Dimming mode adjusts power to compatible heating equipment.
For example, a radiant heat panel may run at reduced power as the enclosure approaches its target temperature.
As a result, the heater can maintain more stable conditions.
Pulse mode controls heating through timed power intervals.
Therefore, it can suit certain heat tape and metal rack systems.
However, pulse mode is not ideal for visible basking lamps because it may cause flickering.
The thermostat can also operate compatible cooling equipment.
For example, a suitable fan can turn on when temperatures rise above the selected setting.
However, cooling mode uses the single output instead of heating control.
The Herpstat supports lighting schedules and effects with compatible equipment.
For example, suitable dimmable lighting can create gradual sunrise and sunset effects.
In addition, supported lighting modes include moonlight simulation.
However, never use dimming with lights that are not designed for it.
The Herpstat 1 SpyderWeb also supports humidity functions with a compatible optional humidity probe.
For example, it can operate suitable fogging equipment based on humidity readings.
However, using the output for humidity means it cannot also control heating at the same time.
Many reptiles benefit from natural temperature changes throughout the day.
Therefore, the Herpstat 1 SpyderWeb supports up to four daily temperature settings.
You can create a schedule with different target temperatures.
As a result, the enclosure can follow a more natural daily cycle.
Temperature ramping creates smooth changes between scheduled settings.
For example, the thermostat can gradually increase the target temperature during the morning.
Consequently, the heating system avoids sudden changes between programmed targets.
Once programmed, the thermostat follows your selected schedule.
Therefore, you do not need to change the temperature manually each morning and evening.
The Herpstat 1 SpyderWeb includes several safety features. Therefore, it can help identify heating problems before they become more serious.
You can set upper and lower temperature limits.
If temperatures move beyond these limits, the controller can sound an alarm.
As a result, you receive a warning that the enclosure needs attention.
The thermostat monitors its connected sensor.
If the probe fails or becomes disconnected, the controller shuts off heating.
Consequently, this helps reduce the risk of uncontrolled heating.
The controller includes an internal safety relay.
When selected fault conditions occur, the relay can disconnect power to the output.
Therefore, it adds another layer of protection.
The Herpstat tracks power interruptions. In addition, it stores programmed settings in memory.
As a result, you can review outage events while keeping your saved configuration.
An optional passcode helps prevent unwanted changes.
Therefore, this feature can be useful in reptile rooms and shared animal-care areas.
Always secure the temperature probe so your reptile cannot move it. In addition, use an independent thermometer to check enclosure temperatures. Wi-Fi alerts are helpful, but they should never replace regular equipment checks.
PVC cages hold heat well. Therefore, proportional heating can help prevent large temperature swings.
For example, the Herpstat can control a compatible ReptiRad heat panel in a Cornel’s World PVC enclosure.
Radiant heat panels provide overhead heating for many reptile species.
When paired with a suitable thermostat, they can maintain steady temperatures.
As a result, the Herpstat 1 SpyderWeb is a strong choice for compatible overhead heating systems.
Many breeding racks use heat tape to warm several tubs.
The Herpstat can control a suitable rack heating circuit within its 700W limit.
However, all connected heating devices share the same temperature-control output.
Stable temperatures are important during reptile egg incubation.
Therefore, the Herpstat can regulate suitable incubator heating equipment.
In addition, its alarms and history graphs provide useful information about heating performance.
Compatible halogen and incandescent basking lamps can use dimming control.
As a result, the thermostat can adjust lamp power to maintain the selected temperature.
However, always confirm that the lamp supports dimming.
First, place the thermostat in a dry location outside the enclosure.
Also, keep it away from water, misting systems and excessive heat.
Next, connect the included steel-tipped temperature probe.
Then, secure it at the correct temperature-control point.
For example, overhead heating systems often use a probe mounted below the heat source.
Plug the compatible heating device into the controlled outlet.
However, do not exceed the 700W maximum load.
Select the correct mode for your equipment.
For example, choose dimming for compatible radiant heat panels.
Then, confirm the heating device responds correctly.
Set the desired target temperature.
Next, add optional daily schedules and temperature ramping.
Also, configure high and low temperature alarms.
Follow the manufacturer’s instructions to connect the thermostat to your Wi-Fi network.
Then, open the supported local browser interface.
Afterward, configure online monitoring and email alerts if desired.
Finally, allow the enclosure to reach its programmed temperature.
Then, compare the reading with an independent thermometer.
For best results, monitor the system for at least 24 hours before relying on it for routine use.
The Herpstat 1 SpyderWeb supports many reptile heating products. However, each device must use the correct control mode.
The Herpstat 1 SpyderWeb pairs well with Cornel’s World’s ReptiRad heat panels.
For example, the 40W, 80W, 125W and 220W ReptiRad models are all below the thermostat’s 700W limit.
Therefore, you can choose a panel that suits your enclosure while using proportional temperature control.
However, correct probe placement remains essential for safe heating.
Secure your temperature probe below a compatible overhead heat source.
In addition, a probe mount helps prevent animals from moving the sensor.
Keep a spare steel-tipped temperature probe available for quick replacement.
Add humidity sensing when using the thermostat for supported humidity-control functions.
However, remember that the single output cannot control heating and humidity at the same time.
Do not need Wi-Fi monitoring?
The standard Herpstat 1 offers proportional temperature control without SpyderWeb networking features.
Need two separate heating zones?
The Herpstat 2 SpyderWeb provides two independent outputs with Wi-Fi monitoring.
It is a single-output reptile thermostat with proportional heating and Wi-Fi monitoring. Therefore, it offers accurate temperature control with added online features.
Yes. It supports dimming and pulse heating modes for compatible equipment.
The Herpstat 1 SpyderWeb supports up to 700 watts.
Yes. You can view supported readings through a browser when the thermostat is connected to a suitable network.
You can change supported settings through the local network interface. However, the manufacturer’s online monitoring service does not support remote setting changes.
No. Normal heating control works without Wi-Fi. However, online monitoring and email alerts require network access.
Yes. The thermostat supports email warnings for configured error conditions.
Yes. SpyderWeb includes history graphs to help you review heating performance.
Yes. You can set up to four temperature periods per day. In addition, ramping creates smooth changes between settings.
Yes. However, a compatible humidity probe is needed for sensor-based control. The single output cannot manage heating and humidity at the same time.
Yes. One steel-tipped temperature probe is included.
Yes. Compatible ReptiRad heat panels can use the thermostat’s proportional heating modes.
The thermostat detects sensor faults and shuts off heating to help prevent unsafe operation.
Yes. You can set high and low temperature alarms.
Yes. Programmed settings remain stored in memory. In addition, the thermostat tracks power interruptions.
Both offer proportional heating and safety features. However, SpyderWeb adds Wi-Fi monitoring, history graphs, email alerts and more detailed daily schedules.
Spyder Robotics provides a one-year limited manufacturer warranty.
Precision Heating With Wi-Fi Monitoring
700W Output • Proportional Heating • Advanced Safety
Spyder Robotics • One Steel-Tipped Temperature Probe Included
BOX SIZE DIMENSIONS AND WEIGHTS FOR SHIPPING COSTS ONLY
| Weight | 3.4 lbs |
|---|---|
| Dimensions | 12 × 9 × 5 in |
No additional boxes are available for this product.
