3×2×2 PVC Snake Enclosure Kit (90 Gallon) – 36″ × 22″ × 22 3/4″

Actual Outside Dimensions

This footprint supports a proper gradient. In addition, it fits well in rooms where a 4×2×2 is too large.

How This 3×2×2 PVC Snake Enclosure Kit Works

Start by selecting the 3×2×2 PVC snake enclosure. Then choose the heating option you prefer.
After that, pick a thermostat that matches your heat source.
As a result, the kit builds itself around how you keep your snake.

• Step 1: Pick the enclosure configuration (sliding glass is most common).
• Step 2: Choose your primary heat method (RHP, belly heat, or overhead, depending on your approach).
• Step 3: Add a thermostat to control that heat safely.
• Step 4: Choose substrate and basic setup items (hides, water bowl, décor).
• Step 5: Test temps first. Then add your snake.

Tip: Always use a thermostat. Because even “low wattage” heat can overheat a closed enclosure without control.

Heating Options for a 3×2×2 PVC Snake Enclosure

Snakes do best with stable heat zones. Therefore, aim for a consistent warm side and a reliable cool side.
In addition, your room temperature decides whether you need overhead heat, belly heat, or a combination.

• Radiant Heat Panel (RHP): clean, controlled ambient heat from above
• Heat tape / belly heat: under-cage style heat, controlled by thermostat
• Overhead heat (optional): useful in colder rooms or when you want a stronger warm-zone gradient

However you heat, confirm temps with a probe or infrared thermometer. Then adjust thermostat settings slowly.

Thermostats and Temperature Control

Thermostats protect your animal and your enclosure. Because PVC holds heat well, control matters even more.
As a result, your setup stays consistent through day/night swings.

• On/Off thermostats: simple control for basic heat sources
• Dimming/pulse thermostats: smoother control and steadier temperatures
• Multi-zone thermostats: ideal if you run more than one heat source

Tip: Place the probe where your snake actually rests. For example, inside the warm hide near the floor for many species.

Substrate Choices for Snake Setups

Substrate depends on humidity goals and cleanup style. For example, some keepers want quick spot cleaning, while others want a more natural look.
Therefore, choose based on your snake, your schedule, and your room climate.

• Easy-clean: paper towel or liner style setups
• Moderate humidity: aspen or similar dry substrates (species dependent)
• Higher humidity: cypress, coconut, or soil mixes (species dependent)

However, always match substrate to the species’ needs. In addition, keep water bowls stable and large enough for soaking when appropriate.

Quick Setup Checklist

• Assemble the 3×2×2 PVC enclosure.
• Install your chosen heat source.
• Set up and test your thermostat.
• Add substrate, hides (warm + cool), and a water bowl.
• Confirm temps for 24 hours. Then introduce your snake.

FAQ